POSITION: Home -> Products -> GSM Alarm -> GSM Alarm System with 8/16 wired and 99 wireless zone
|Product Name: GSM Alarm System with 8/16 wired and 99 wireless zone
|| GSM Alarm System with 8/16 wired and 99 wireless zone
1. LED display, with keypad on the panel
2. Anti-tampering function:When the main control panel is removed or shaken from the wall, it will emit a high decible voice alert and auto dial the preset phone numbers at the same times..
3. Learning code: It can work with different sensors and the user can easily add and remove the sensors
4. Compatible with wired and wireless sensors: The panel has 99 wireless zones, 8/16 wired zones. It can use with sensors like PIR Motion Sensor, IR Beams, Smoke Detector, Gas Detector, Panic Buttons and so on.
5. The system can use with External Siren, no build-in siren
6. Great user-friendly design , easy for wiring
7. Low-power alert Function: Once the backup lithium battery is in low power state or AC power has been cut, the panel will send SMS to alert the user. If the system was use with Central Monitoring Station, the panel will also send this message to the Central Monitoring Station
8. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there is no voice instruction.
9. Remote control:If the system do not alarm, the user can remote control the system to arm/disarm on phone after inputing correct password. And he can also send SMS to remote control the system to arm/disarm.When alarm, the system will send SMS to user first, then send message to Central Monitoring Station, After that, the system will auto dial the preset phone numbers. Once the alarm phone has been connected, the system will alert the alarm to user, what′ more, the user can also remote control the system to arm/disarm on phone at that time
10. Back-up battery: When the AC power is cut, the system can continue to work because it will turn on the backup battery automatically. And when the backup battery lack of power, the panel will charge for it.
11. Our terminals communicate with Central Monitoring System (CMS) by GPRS. And the TTS Voice Module of the CMS will alert the user which zone and which sensor alarm
12. Great lighting protection design
13. Great customized design
14. Private alarm monitoring: Alarm monitoring without central plarform(That means the user set the number by himself and the alarm message will be handled by his friends or neighbour ) . The system will auto dial the preset phone numbers through GSM Network, and the user can also set SMS to inform the alarm, the most important is that the user can set alarm by SMS and GSM
15. GSM Network Alarm System: The system support SMS. And when the panel receive the SMS from the user, it will reply SMS to user automatically and arm/disarm the system as the SMS message.
16. we use high-quality,professional,industrial GSM module to disign and make our products.
17. Listen-in Function: After input correct password, the owner can hear the spot voice clearly. And the user can remotely prolong or cut listen-in on phone. What′s more the user can disarm the system during listen in.
18. On the remote controller, the user can arm/disarm the system and do emergency calling. It is very convinient for the user.
19. Intelligent control system to check that whether the user has handled and confirmed the alarm. After confirmed, the system will not dial the pone numbers.
20. DC/AC power auto switch: charging by AC power , switch to DC power if AC power cut to make system no fail. the whole system can be used to prevented against burglar,robber,fire,etc.
21. The system can use with the electronic board to indicate the arm/disarm/alarm state to deterrent the intruder
22. The system is compatible with SSG Wireless Doorway Keypad. (Optional function)
|1. The Dimension of the Plastic Shell: 27*26.6*8CM|
2. Power Adaptor: AC To DV conventor. Input: AC 220( AC 110V/240V is optional, output:9VDC500mA.
3. Standby Current: ≤40mA Alarm State Current: ≤350mA
4. Working Condition: Indoor, temperature: -10 ~ 50 degree, Relative humidity;≤90% atmospheric pressure: 86 ~106Kpa
5. Alarm Receiving Mode: AM AM Receiving Distance:≥120M (In the open area)
6. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there is no voice instruction.
7. Preset Phone Numbers: 6 Group (Maximum 30 digits for each group)
8. SMS Number: 1 Group
9. External Siren: ≥110dB; no built-in Siren
11. Protocol for CMS:GPRS
12. GSM Band: Triple-band 900/1800/1900 MHZ, Quad-band 850/900/1800/1900 MHZ
|1. The system is mainly used for home. Especially for those house which has garage,a lot of rooms.
2, With LED Display each alarm zone. When alarm, we can know which sensor was triggered.
3. With metal shell, design for industrial use. Can also be used for office and some other place where have a stringent demand for the function